underwater
  Safety Information   Installing SureLock Weight Pouches
  Dealer Inspection and Service   Inflation Methods using the i3 System
  Warranty Information   Deflation Methods using the i3 System
  Basic Setup   Special Features
  Donning and Adjustment Procedures   Predive Inspection (i3 Inflation System)
Weight Integration Features   Postdive Care and Maintenance

Weight Integration Features

Loading Weight into the SureLock™ Pouches

Aqua Lung recommends that each pouch is loaded with equal amounts of weight for optimum balance, preventing the tendency to roll to one side during the dive. Also, it is strongly recommended that each weight pouch is fully loaded with two separate weight blocks for the standard pouch, or four separate blocks for the large pouch. For example, if you want to load a standard pouch with 6 pounds, use two separate 3 pound blocks (see step 2, next page); if you want to load a large weight pouch with 12 pounds, use four separate 3 pound blocks.

Loading Weight In The Standard Size SureLock™ Weight Pouches

Lift up each pouch’s flap (a), and lay it back over the handle (b). While holding the pouch fully open, insert the weight and then close the flap. When each pouch has been loaded with weight, firmly run your hand over the flaps to securely fasten the hook & loop (c).

warning NOTE: Some weight pouches are specially pre-formed to fit the contour of your waist. Do not attempt to bend or straighten a pre-formed pouch.